View all guides
V5 Compact TV Box
Installation GuideBefore you begin
Please ensure you have at least one b-box 3 / Internet Box installed.
If you are replacing a TV Box
- Call 0800 99 696 free of charge and follow the instructions. Please make sure you have a Proximus payment statement or letter to hand, showing your customer number and line number.
- Please make sure you use the new remote control and all the cables provided.
- If a technician replaces your TV Box, they will, of course, bring the necessary equipment with them.
Required components for the installation
- The V5 Compact (HD) TV Box
- The remote control and its batteries
- The power supply cable
- The Ethernet cable
- The HDMI cable
Connect the TV Box to the b-box
Use the Ethernet cable and connect it to one of the yellow LAN ports at the back of the b-box.
-
-
Don’t want to trip over cables, or are your b-box and TV Box too far apart? Don’t panic – discover our wireless solution!
-
If you’d like to connect an extra television to Pickx, you’ll need a second TV Box. Check first whether this is possible in your home!
Switch on the TV Box
Connect the power supply cable to your TV Box and to a power socket.
-
The solution is to switch it off and on again using the switch on the back of the TV Box. This will restart it.
Check the indicator lights on the b-box
The DSL and LAN indicator lights on the front should turn blue and remain lit.
Connecting the TV Box to the TV
You’re almost there! Now connect your TV Box to your TV using the HDMI cable for the best picture quality.
-
-
In this case, use a SCART cable. Connect the round end of the cable to the SCART port on the TV Box, and the flat plug to the back of your TV.
-
There are three options available to you, depending on the connections available on your audio device
- Via the HDMI port using an HDMI cable
- Via the S/PDIF port using an optical cable
- Via the SCART port using an analogue cable available from your Proximus Centre.
Configure the TV Box
Turn on your TV; the start-up screen will appear.
If this doesn’t happen, use your TV’s remote control to select the external source to which your TV Box is connected (HDMI1, HDMI2, HDMI3, etc.).
Next, take the Proximus remote control, remove the protective tab from the batteries and enter the details shown on the screen.
These arrow keys allow you to navigate through the menu.
To confirm your choice.
Select the language
Enter your line number
This is the telephone number or identification number shown in the confirmation letter you received when your TV subscription was activated. If you have Fiber, it is the 9-digit TV reference number.
Enter the PIN code
The parental PIN code is 1234 by default, unless you have already changed it.Did you enter the wrong PIN code? Use the arrow keys to navigate and re-enter the correct PIN code. Forgotten your PIN code? Call 0800 99 696 free of charge.
Pickx screen
Configuration time: 15 minutes maximum
There you go, your TV Box is now configured!
Other useful guides