Skip to main content
Menu
View all guides

Internet Box

Installation Guide
Step 1

Before you begin

My Internet Box
Select the type of Internet Box you wish to install.
Installation type
Check which type of installation you have at home. It may consist of a single 5-pole socket, a DSL connection socket or a fibre-optic connection.

Required components for the installation

The model of the devices/accessories may differ from the illustrations. If you have received this product as part of an exchange or following installation by a technician, you will already have the Internet Box or the accessories required for it to work. Do you need additional equipment for the installation (cables, etc.)? Visit a Proximus point-of-sale outlet.
Skip steps 2 and 3 and connect the DSL cable to the blue DSL port on the back of the Internet Box.

Step 2

Connect the filter

Disconnect any existing equipment or filters from your DSL connection socket and fit the supplied DSL splitter in its place.
In this case, check the position of the buttons on the back of the DSL splitter: they must be positioned fully upwards.


Step 3

Connect the Internet Box to the filter

Use the DSL cable and connect it to the blue DSL port on the back of the Internet Box.
  • Use a dedicated cable to connect the Internet Box between the DSL connection socket and the telephone socket.
  • Connect the telephone plug to the Internet Box using the DSL cable.
  • Connect it to the blue DSL port at the back of the Internet Box.
This equipment (the cable used to connect the Internet Box, the telephone socket, the telephone plug) is not included in this box. It is either already part of your current setup or you will need to purchase it. The cable used to connect the Internet Box is a standard telephone cable (VVT or UTP – the latter is not recommended). You can purchase it from a Proximus point-of-sale outlet or a shop specialising in electrical equipment. If you are using only a cable specifically for connecting the Internet Box, ensure that it is correctly connected to the connection socket.
  • Screw the bracket to the wall.
  • Then attach the Internet Box to it.
This wall mount is available free of charge via our customer service on 0800 55 800.

Step 4

Switch on the Internet Box

Connect the power supply cable to your Internet Box and to a power socket.
The switch is pressed in.
The blue Internet indicator light on the front turns on.

Step 5

Internet Box configuration and automatic updates

Configuration may take a few minutes.
Once the indicator lights below are turned on, you can proceed with setting up your TV Box, computer or other devices.
The ‘Phone’ and ‘Wi-Fi’ indicator lights will turn on if you have these services.
  • Solid blue: there is an Internet connection.

  • Off: the Internet Box is switched off.

  • Red: there is a fault. Please restart the Internet Box.

  • Solid blue: the telephone service is configured correctly.

  • Blinking white: the telephone service is temporarily unavailable.

  • Blinking turquoise: the handset is off the hook.

  • Solid turquoise: a call is in progress.

  • Off: no telephone service is configured on the Internet Box.

  • Red: The telephone service is not working properly. Please restart the Internet Box.

  • Solid blue: Wi-Fi is connected.

  • Blinking white: indicates that WPS synchronisation is possible with another WPS-enabled Wi-Fi device (max. 2 minutes).

  • Solid white: the WPS configuration was successful.

  • Off: Wi-Fi is off.

  • Red: Wi-Fi is not working properly. Please restart the Internet Box.


Was this guide helpful?

Thank you for your feedback!

Do you have any suggestions for us? What did you like?

We are sorry to hear that!
Your feedback matters to us!

What are you looking for?

Your feedback has been sent to our teams.