View all guides
Internet Box
Installation GuideBefore you begin
Please check carefully that you only have one 5-pole socket in your home.
If this is not the case, you should have a DSL connection socket.
Required components for the installation
- The Internet Box
- The power supply cable
- The adapter
- The DSL splitter
- The DSL cable
- The Ethernet cable
The model of the devices/accessories may differ from the illustrations. If you have received this product as part of an exchange or following installation by a technician, you will already have the Internet Box or the accessories required for it to work. Do you need additional equipment for the installation (cables, etc.)? Please visit a Proximus point-of-sale outlet.
Connect the adapter and the filter
Unplug any existing equipment or filters from your socket and first plug in the Adapter, next the DSL splitter.
-
In this case, check the position of the buttons on the back of the DSL splitter: they must be positioned facing upwards.
Connect the Internet Box to the filter
Use the DSL cable and connect it to the blue DSL port at the back of the Internet Box.
-
- Screw the bracket to the wall.
- Then attach the Internet Box to it.
This wall mount is available free of charge via our customer service on 0800 55 800.
Switch on the Internet Box
Connect the power cable to your Internet Box and to a power socket.
The switch is in the pressed-in position.
The blue Internet indicator light on the front turns on.
Internet Box configuration and automatic updates
Configuration may take a few minutes.
Once the indicator lights below are turned on, you can proceed with setting up your TV Box, computer or other devices.
The ‘Phone’ and ‘Wi-Fi’ indicator lights will turn on if you have these services.
-
- Solid blue: there is an Internet connection.
- Off: the Internet Box is switched off.
- Red: there is a fault. Please restart the Internet Box.
Solid blue: the telephone service is configured correctly.
Blinking white: the telephone service is temporarily unavailable.
Blinking turquoise: the handset is off the hook.
Solid turquoise: a call is in progress.
Off: no telephone service is configured on the Internet Box.
Red: the telephone service is not working properly. Please restart the Internet Box.
Solid blue: Wi-Fi is connected.
Blinking white: indicates that WPS synchronisation is possible with another WPS-enabled Wi-Fi device (max. 2 minutes).
Solid white: the WPS configuration was successful.
Off: Wi-Fi is off.
Red: Wi-Fi is not working properly. Please restart the Internet Box.
There you go, your Internet Box is now configured!