You can also synchronize the Internet Box+’s Wi-Fi with the Wi-Fi Booster+ using the Ethernet cable. When the Internet Box+ screen prompts you to connect a Wi-Fi Booster+, press the right-hand arrow.
Connect the Wi-Fi Booster+ using the supplied Ethernet cable (the black cable with yellow connectors). Plug one end of the cable into the yellow 2.5 G port on the Wi-Fi Booster+ and the other end into one of the three yellow LAN ports on the Internet Box+.
Connect the Wi-Fi Booster+ power cable and turn it on.
Leave the cable connected whilst the update is taking place. This may take around 10 minutes. Wait until all three indicator lights on the Wi-Fi Booster+ show a solid blue light (ignore any intermediate states of the indicator lights).
You can then unplug the Wi-Fi Booster+ and place it in your chosen location. Continue with this installation guide from Step 4.
If you have several Wi-Fi Booster+ units to install, follow the same procedure for each device.
A. On the Internet Box+ screen, press
Then press “Wi-Fi”, “Connecter un Wi-Fi Booster”, then confirm with
B. On the Wi-Fi Booster+, press and hold
(which may take up to 10 seconds) until the Indicator light starts to flash white.
C. Once synchronisation is complete, the Indicator light
turns green and the Indicator light
Solid blue and steady.
This may take a few minutes. Both indicator lights then stop flashing.
A confirmation message stating that synchronisation is complete will appear on the Internet Box+ screen.
You can unplug your Wi-Fi Booster and place it in whichever room you like.
Step 4
Connect the Wi-Fi Booster+ to the TV Box
Use the Ethernet cable and connect one end to the yellow 2.5G LAN port on the back of the Wi-Fi Booster+. Connect the other end of the cable to the TV Box.
Step 5
Switch the Wi-Fi Booster+ and the TV Box back on
Connect the Wi-Fi Booster+ power cable to the power socket.
Check that the POWER button is pressed down.