View all guides
Modem 5G
Installation GuideBefore you begin
With this Modem 5G, your Internet connection is guaranteed. It will automatically switch to a 5G connection if your fixed broadband connection is interrupted.
Required components for the installation
- The Modem 5G
- The power supply cable
- The Ethernet cable
Position the Modem 5G
Place your Modem 5G near your Internet Box in a location with good 5G coverage.
Connect the Modem 5G to the Internet Box
Use the Ethernet cable and connect it to the yellow LAN4 Ethernet port on the back of the Internet Box. Connect the other end of the cable to the red LAN 2 port on the Modem 5G.
Switch on the Modem 5G
Connect the Modem 5G’s power supply cable to a power socket.
At the rear, the switch is in the “ON” position.
Configuration and automatic updates for the Modem 5G
Then wait a few minutes for the device to configure itself automatically.
The number of bars on the modem indicates the strength of the 5G signal being received.
If the signal is weak (few bars), you can move the modem to another location to improve reception. If necessary, use a longer Ethernet cable.
If the signal is weak (few bars), you can move the modem to another location to improve reception. If necessary, use a longer Ethernet cable.
There you go – your Internet connection is sorted!