Skip to main content
Menu
View all guides

Wi-Fi Booster+ 7

Installation Guide
Step 1

Before you begin

Make sure you have an Internet Box+ 7 and check that the Wi-Fi icon is displayed on the screen.
My Wi-Fi Booster
Installation type
Select the type of configuration you wish to set up.

Required components for the installation

This guide is here to help you. Hold the device upright. Here is a description of the back of the device.
From bottom to top
The first port is for plugging in the power supply cable.
The second yellow 10G LAN port is for connecting an Ethernet cable.
The third 1 2.5G LAN port (yellow) is used to connect an Ethernet cable.
The hole in the fourth position is used to reset the device.
The button in the fifth position is used to turn on and off the device.

Step 2

Switch on the Wi-Fi Booster+

Connect the Wi-Fi Booster+ power cable to a power socket in the same room as the Internet Box+. Press the POWER button.
The indicator lights go through several states (steady/flashing) during start-up.

Wait a few moments
until the indicator light 
  turns to a flashing orange or blinking white light before moving on to the next step.
  • Screw the bracket to the wall.
  • Then attach the Wi-Fi Booster to it.
This wall mount is available free of charge via our customer service on 0800 55 800.

Step 3

Synchronize the Internet Box+ Wi-Fi with the Wi-Fi Booster+

You can also synchronize the Internet Box+’s Wi-Fi with the Wi-Fi Booster+ using the Ethernet cable. When the Internet Box+ screen prompts you to connect a Wi-Fi Booster+, press the right-hand arrow.

 
  1. Connect the Wi-Fi Booster+ using the supplied Ethernet cable (the black cable with yellow connectors). Plug one end of the cable into the yellow 2.5 G port on the Wi-Fi Booster+ and the other end into one of the three yellow LAN ports on the Internet Box+.
  2. Connect the Wi-Fi Booster+ power cable and turn it on.
  3. Leave the cable connected whilst the update is taking place. This may take around 10 minutes. Wait until all three indicator lights on the Wi-Fi Booster+ show a solid blue light (ignore any intermediate states of the indicator lights).
  4. You can then unplug the Wi-Fi Booster+ and place it in your chosen location. Continue with this installation guide from Step 4.

If you have several Wi-Fi Booster+ units to install, follow the same procedure for each device.


A. On the Internet Box+ screen, press 
Then press “Wi-Fi”, “Connecter un Wi-Fi Booster”, then confirm with
B. On the Wi-Fi Booster+, press and hold
(which may take up to 10 seconds) until the Indicator light
starts to flash white.
C. Once synchronisation is complete, the Indicator light 
turns green and the Indicator light
Solid blue and steady.
This may take a few minutes. Both indicator lights then stop flashing.
A confirmation message stating that synchronisation is complete will appear on the Internet Box+ screen.
You can unplug your Wi-Fi Booster and place it in whichever room you like.

Step 4

Connect the Wi-Fi Booster+ to the TV Box

Use the Ethernet cable and connect one end to the yellow 2.5G LAN port on the back of the Wi-Fi Booster+. Connect the other end of the cable to the TV Box.

Step 5

Switch the Wi-Fi Booster+ and the TV Box back on

Connect the Wi-Fi Booster+ power cable to the power socket.
Check that the POWER button is pressed down.
You can switch on your TV Box.
You’re free to connect other devices to the other free yellow Ethernet port on the Wi-Fi Booster+: games consoles, Blu-ray players, computers.
  • Blue: the Wi-Fi Booster+ is turned on.
  • Purple: the Wi-Fi Booster+ is starting up.
  • Blinking white: Connecting to the internal network. This may take a few minutes.
  • Flashing orange: The Wi-Fi Booster+ has booted up but is not yet configured.
  • Green: optimal signal.

  • Orange: acceptable signal.

  • Red: poor signal. You will need to move the device or use a second one to boost the signal.

  • Blue: the Wi-Fi Booster+ is working correctly.

  • Blinking white: a WPS pairing is in progress.

  • Red: The Wi-Fi on the Wi-Fi Booster+ is not working. Please restart the device.

  • Off: Wi-Fi is not configured.


Was this guide helpful?

Thank you for your feedback!

Do you have any suggestions for us? What did you like?

We are sorry to hear that!
Your feedback matters to us!

What are you looking for?

Your feedback has been sent to our teams.