Skip to main content
Menu
View all guides

b-box 3V+

Installation Guide
Step 1

Before you begin

My b-box
Select the type of b-box you wish to install.
Installation type
Check the installation type. It may consist of a single 5-pole socket, a DSL connection socket or a fibre-optic connection.

Required components for the installation

The model of the devices/accessories may differ from the illustrations. If you have received this product as part of an exchange or following installation by a technician, you will already have the b-box or the accessories required for it to work. Do you need additional equipment for the installation (cables, etc.)? Please visit a Proximus point-of-sale outlet.

Step 2

Connect the b-box 3V+ to the Fiber modem

Use the Ethernet cable and connect it to the red WAN port on the back of the b-box.
  • Turn it clockwise to detach it from its base.
  • Screw the base to the wall.
  • Then reattach the b-box to the base.

Step 3

Switch on the b-box

Connect the power cable to your b-box and to a power socket. The switch is in the ‘I’ position and the ‘POWER’ indicator light on the front turns on.

Step 4

Configuration and automatic updates for the b-box

Configuration time: 30 minutes maximum
Once the indicator lights below are turned on, you can proceed with setting up your TV Box, computer or other devices.
Various indicator lights will turn on depending on the services you have ordered.
  • Is this your first time connecting to Pickx and/or the Internet? You will need to wait until the service is activated.
  • Is this not your first time connecting to Pickx and/or the Internet? Check that the Ethernet cable is properly connected.
Solid blue light: the b-box is turned on.
Solid blue light
: the b-box is synchronized.

Flashing blue light
: synchronization is in progress (max. 3 minutes).
Solid blue light
: the connection to the b-box Fiber is established.

Flashing blue
light: synchronisation is in progress.
Solid blue light: there is an Internet connection.
Solid blue light: at least one LAN port is in use.
Solid blue light
: the telephone service is correctly configured.

Flashing blue light
: a call is in progress.
Solid blue light
: at least one cordless handset (DECT) is connected.

Flashing blue light
: a call is in progress.
Flashing blue: indicates that WPS pairing is possible with another WPS-enabled Wi-Fi device (max. 2 minutes) or that a DECT handset can be paired with the b-box.
Solid blue light: the Wi-Fi connection is active.

Was this guide helpful?

Thank you for your feedback!

Do you have any suggestions for us? What did you like?

We are sorry to hear that!
Your feedback matters to us!

What are you looking for?

Your feedback has been sent to our teams.