Skip to main content
Menu
View all guides

Mobile Coverage Extender

Installation Guide
Step 1

Before you begin

My device
Select the type of network extension you wish to install.
Please make sure you have a b-box installed and that you have an internet and mobile subscription with Proximus.
My b-box

Required components for the installation



Step 2

Choosing the best location

For optimum coverage, place your Mobile Coverage Extender in a central position in your office, away from a window. Place it on a flat, stable surface or, preferably, attach it to the wall or suspended ceiling using the wall-mounting kit provided, at least 30 cm away from other devices that emit radio waves (Wi-Fi routers, etc.). Also ensure there is adequate space around the unit to prevent it from overheating.
We have also included a set of screws and wall plugs to attach the appliance to the wall. To help you drill in the correct place, please use the template printed on the packaging.

Step 3

Connect the Mobile Coverage Extender to the b-box

Use the Ethernet cable and connect it to one of the yellow LAN ports on the back of the b-box. If all the ports are already in use, we recommend using an Ethernet hub or switch. These devices will allow you to increase the number of available ports.

Step 4

Switch on the Mobile Coverage Extender

Connect the power cable to your Mobile Coverage Extender and to the power socket.
The green indicator light flashes and then stays lit once the configuration is complete.
Set-up and configuration: 15 minutes maximum
Simply restart your mobile phone and make a call. If the ‘Service’ indicator light is green and flashing slowly, communication via the Mobile Coverage Extender is active.
Off: no power.
Green light: your Mobile Coverage Extender is ready for use. No calls in progress.
Flashing rapidly in green: the device is currently being initialised, configured or updated (maximum 15 minutes).
Flashing slowly in green: a call or data transfer is in progress.
Flashing red once: there is no connection between your b-box and the Mobile Coverage Extender. Please repeat Step 3.
Flashing red twice: no Internet connection. Please check that you have access to your fixed-line Internet via your b-box.
Flashes red 3 times: temporary interference. The phones may be too close to the Mobile Coverage Extender. Increase the distance between the phone and the Mobile Coverage Extender.
Flashing red 4 times: the device has overheated. Try placing your Mobile Coverage Extender in a more open and/or well-ventilated area.
Red light: the Mobile Coverage Extender is experiencing excessive interference. This may be due to the proximity of another Mobile Coverage Extender Pro or a Wi-Fi access point. Move the Mobile Coverage Extender.

Was this guide helpful?

Thank you for your feedback!

Do you have any suggestions for us? What did you like?

We are sorry to hear that!
Your feedback matters to us!

What are you looking for?

Your feedback has been sent to our teams.