Operate your home cinema system with the Proximus remote control

Before starting, we ask you to pick up the remote control of your home cinema set and your Proximus remote control. The aim is to transmit the codes from one remote control to the other.
For example, you can copy your home cinema's volume control to the Proximus remote.

Click on your remote control and follow the steps below

Remote control V7

Télécommande V7
  1. Simultaneously press 4 and 6 on your Proximus remote control for 3 seconds. The indicators will not be lit while you do so. After 3 seconds the on/off indicator will come on.
  2. Next, press the button of your Proximus remote control which you wish to reprogram.
    Once the indicator on the remote control lights up briefly, your Proximus remote control is ready to receive the codes.

    If you selected a button which cannot be reprogrammed or if you waited too long (30 seconds) before continuing with the next step, the red indicator will flash a few times very briefly, after which it will go out and the remote control will return to operating mode.

Transmitting the codes to the Proximus remote control

  1. Now hold the remote control of the device (in this example, your home cinema set's remote control) 3 to 6 cm away from the Proximus remote control (the top ends of the remote control units should be facing each other).
  2. Press the button of the remote control of the device which you want to copy to the Proximus remote control.
  3. The functions will have been successfully copied to the Proximus remote control if the red indicator flashes briefly.
  4. The remote control returns to operating mode.
  5. To program other buttons, go back to step 1.
Contrôler votre Home cinéma via la télécommande Proximus TV Avez-vous un système surround ou Home Cinema ? Vous pouvez transférer certains boutons de sa télécommande vers la télécommande Proximus TV. Vous n'avez donc plus besoin d'utiliser en permanence deux télécommandes différentes, car tout peut être regroupé sur la télécommande Proximus.

Remote control V6

  1. Simultaneously press 4 and 6 on your Proximus remote control for 3 seconds. The indicators will not be lit while you do so. After 3 seconds the on/off indicator will come on.
  2. Next, press TV mode key + the button of your Proximus remote control which you wish to reprogram.
    Once the indicator on the remote control lights up briefly, your Proximus remote control is ready to receive the codes.

    If you selected a button which cannot be reprogrammed or if you waited too long (30 seconds) before continuing with the next step, the red indicator will flash a few times very briefly, after which it will go out and the remote control will return to operating mode.

Transmitting the codes to the Proximus remote control

  1. Now hold the remote control of the device (in this example, your home cinema set's remote control) 3 to 6 cm away from the Proximus remote control (the top ends of the remote control units should be facing each other).
  2. Press the button of the remote control of the device which you want to copy to the Proximus remote control.
  3. The functions will have been successfully copied to the Proximus remote control if the red indicator flashes briefly.
  4. The remote control returns to operating mode.
  5. To program other buttons, go back to step 1.

Remote control V5

You cannot control your home cinema with this remote control.

Remote control V4

Contrôler votre Home cinéma via la télécommande Proximus TV Avez-vous un système surround ou Home Cinema ? Vous pouvez transférer certains boutons de sa télécommande vers la télécommande Proximus TV. Vous n'avez donc plus besoin d'utiliser en permanence deux télécommandes différentes, car tout peut être regroupé sur la télécommande Proximus.

  1. Simultaneously press 4 and 6 on your Proximus remote control for 3 seconds. The indicators will not be lit while you do so. After 3 seconds the TV indicator will come on.
  2. Next, press TV mode + the button of your Proximus remote control which you wish to reprogram.
    Once the indicator on the remote control lights up briefly, your Proximus remote control is ready to receive the codes.

    If you selected a button which cannot be reprogrammed or if you waited too long (30 seconds) before continuing with the next step, the red indicator will flash a few times very briefly, after which it will go out and the remote control will return to operating mode.

Transmitting the codes to the Proximus remote control

  1. Now hold the remote control of the device (in this example, your home cinema set's remote control) 3 to 6 cm away from the Proximus remote control (the top ends of the remote control units should be facing each other).
  2. Press the button of the remote control of the device which you want to copy to the Proximus remote control.
  3. The functions will have been successfully copied to the Proximus remote control if the red indicator flashes briefly.
  4. The remote control returns to operating mode.
  5. To program other buttons, go back to step 1.

Remote control V3

Preparing the Proximus remote control

  1. Simultaneously press 1 key and 6 keyfor 3 seconds. The red indicators will not be lit while you do so. After said 3 seconds the red indicator of the device concerned will flash twice and then stay on.
  2. Press the key with 2 arrows button to select the device on which the commands will be recorded.
  3. Press in the oval key button or the recbutton + the desired button for 3 seconds.
    • If the code is valid, one of the red indicators will flash twice as confirmation.
      The red indicator will then stay on; the remote control is ready to be used again.
    • If the code is not valid, the red indicator will flash once. The remote control will stay in configuration mode. Nothing will happen.

Transmitting the codes to the Proximus remote control

  1. Place the remote control of the device in front of the Proximus remote control. This way the latter will receive the codes via infra-red signals and the functions will be copied to it.
  2. Press the associated button of the original remote control.
  3. The functions will have been successfully added or copied to the Proximus remote control if the red indicator flashes twice as confirmation. The red indicator will stay on and the remote control will return to operating mode.
  4. To finish, press the ok button.

Remote control V2

Preparing the Proximus remote control

  1. Simultaneously press 1 and 6for 3 seconds. The red indicators will not be lit while you do so. After said 3 seconds the red indicator of the device concerned will flash twice and then stay on.
  2. Press the key with 2 arrows button to select the device on which the commands will be recorded.
  3. Press in the oval button or the recbutton + the desired button for 3 seconds.
    • If the code is valid, one of the red indicators will flash twice as confirmation.
      The red indicator will then stay on; the remote control is ready to be used again.
    • If the code is not valid, the red indicator will flash once. The remote control will stay in configuration mode. Nothing will happen.

Transmitting the codes to the Proximus remote control

  1. Place the remote control of the device in front of the Proximus remote control. This way the latter will receive the codes via infra-red signals and the functions will be copied to it.
  2. Press the associated button of the original remote control.
  3. The functions will have been successfully added or copied to the Proximus remote control if the red indicator flashes twice as confirmation. The red indicator will stay on and the remote control will return to operating mode.
  4. To finish, press the ok button.

Remote control V1

Remote control V1

Preparing the Proximus remote control

  1. Simultaneously press 1 and 6for 3 seconds. The red indicators will not be lit while you do so. After said 3 seconds the red indicator of the device concerned will flash twice and then stay on.
  2. Press the key with 2 arrows button to select the device on which the commands will be recorded.
  3. Press in the oval button or the recbutton + the desired button for 3 seconds.
    • If the code is valid, one of the red indicators will flash twice as confirmation.
      The red indicator will then stay on; the remote control is ready to be used again.
    • If the code is not valid, the red indicator will flash once. The remote control will stay in configuration mode. Nothing will happen.

Transmitting the codes to the Proximus remote control

  1. Place the remote control of the device in front of the Proximus remote control. This way the latter will receive the codes via infra-red signals and the functions will be copied to it.
  2. Press the associated button of the original remote control.
  3. The functions will have been successfully added or copied to the Proximus remote control if the red indicator flashes twice as confirmation. The red indicator will stay on and the remote control will return to operating mode.
  4. To finish, press the ok button.