×
×

Install your Wi-Fi Bridge

The Wi-Fi Bridge allows you to connect your modem to your Proximus TV decoder wirelessly. The installation will depend on the type of modem you have: b-box 3 or b-box 2.


B-box 3 and Wi-Fi Bridge

Wi-Fi BridgeB-box 3
Connecter votre TV à votre modem via un Wi-Fi Bridge Le Wi-Fi Bridge envoie le signal TV de votre modem vers votre décodeur via le wi-fi. Suivez nos explications pour installer votre Wi-Fi Bridge.
  1. Check that the little lever on the back of the Wi-Fi Bridge is in "Auto" position Auto button
  2. Connect the Wi-Fi Bridge to the decoder using an Ethernet cable.
  3. Plug the Wi-Fi Bridge in to an electrical socket.
  4. Switch on the Wi-Fi Bridge by pressing the button Power at the back. The Power led led will light up.
  5. Press for 2 seconds on the WPS led button of the b-box 3 modem.
  6. Within two minutes, press for 2 seconds on the WPS button of the Wi-Fi Bridge.

The WPS leds on the two devices will light up. The wireless led and link quality led leds of the Wi-Fi Bridge light up: your Wi-Fi Bridge is now connected to the b-box 3.

If you have several decoders, install one Wi-Fi Bridge per decoder.


B-box 2 and Wi-Fi Bridge

Wi-Fi BridgeB-box 2

2 Wi-Fi Bridges are needed to connect a decoder to your b-box 2.

Upgrade your b-box 2

  1. Call 0800 96 332.
  2. Enter the line number (shown on your last bill) and follow the menu instructions.
  3. Wait 20 minutes. The modem will reboot automatically.

Install the 1st Wi-Fi Bridge near your b-box 2

  1. Check that the little lever on the back of the Wi-Fi Bridge is in "Access point" position access button.
  2. Connect the Wi-Fi Bridge to the modem on a TV port using the Ethernet cable.
  3. Plug the Wi-Fi Bridge in to an electrical socket.
  4.  Switch on the Wi-Fi Bridge by pressing the button Power at the back. The Power led will light up.
Within 2 minutes, the access point ledled will light up. Your Wi-Fi Bridge is in transmitter mode.

Install the 2nd Wi-Fi Bridge near the decoder
  1. Check that the little lever on the back of the Wi-Fi Bridge is in "Auto" position Wi-Fi Bridge Auto button.
  2. Connect the 2nd Wi-Fi Bridge to the decoder using the grey ethernet cable.
  3. Plug the device in to an electrical socket.
  4. Switch it on by pressing the button Power on the back of the Wi-Fi Bridge. The indicator Power will light up.

Syncing the two Wi-Fi Bridges

  1. Press for 2 seconds on the WPS button WPS of the Wi-Fi Bridge connected to the b-box 2.
  2. Within 2 minutes, press for 2 seconds on the WPS button WPS ledof the Wi-Fi Bridge connected to the decoder.

The WPS leds of the two devices will light up. The Wi-Fi ledof the Wi-Fi Bridges light up: your decoder is connected to the network. The led remain lit on the second Wi-Fi Bridge: it is connected to the other Wi-Fi Bridge.

If you have several decoders, install one Wi-Fi Bridge per decoder.

Did you find this helpful?

Thank you

Contact

Our advisors are at your disposal. Choose your contact mode.