Reset your Wi-Fi Booster

You have a problem with your Wi-Fi Booster? First try the following solutions:

  1. Restart your Wi-Fi Booster by pressing the Power button to turn off the device, then pressing it again a few seconds later. The Power LED doesn't light up? Check that the Wi-Fi Booster is connected to an electrical outlet.
  2. Verify that the switch on the back of the Wi-Fi Booster is in the AUTO position, unless you have connected it to the modem via ethernet cable (in this case, the switch must be on Access Point).
  3. Resynchronize the Wi-Fi Booster. Caution: Remember that double synchronization is required, as indicated in the installation guide.
  4. Check the LEDs on your Wi-Fi Booster.

Your problem is not solved? We suggest that you to reset your Wi-Fi Booster:

  1. Press for at least 10 seconds with a pencil or toothpick into the small hole on the back of the unit.
  2. Release when all LEDs except Power and WPS go out. The WPS indicator light will go out after a few seconds.
  3. Unplug your Wi-Fi Booster.

Your Wi-Fi Booster is now reset. You can reinstall it.

Réinitialisation du Wi-Fi Booster

Do you have a question?

Ask one of our advisors. Make your choice: