×
×

Installation of the PLC adapter

PLC adapters allow you to connect your b-box modem to your set-top box over the electric power network. You will need at least two PLC: one near your b-box and the other near your set-top box. After that you can install as many PLC as you like in your home.

Moved, PLC purchased separatly

You have moved your b-box or your set-top box? You have bought your PLC separatly? You have to reset and synchronize your PLC before to install them.

plc adapter
Installing your first PLC adapters
  1. Plug a PLC into a power socket near your b-box.
  2. Connect your PLC to the b-box using an Ethernet cable.
    plc connection
  3. If possible, connect your b-box to the PLC or a multi-socket plugged into the PLC.
    plc power supply
  4. Plug in the second PLC near your set-top box. Connect the PLC to the set-top box using an Ethernet cable.plc set-top box.
  5. If possible, connect the power cable of the set-top box to the PLC or to a multi-socket plugged into the PLC.
You have now finished configuring and installing your PLC.
Installer vos adaptateurs CPL Cette vidéo vous explique comment relier votre modem b-box et votre décodeur via 2 adaptateurs CPL de Proximus.
Install additional PLC adapters
  1. Plug in your additional PLC in the same room as a previously configured PLC. Wait 45 seconds.
  2. Press the button on the side of the previously configured PLC for a second.
  3. Within the next two minutes, press the button on the side of the PLC you just plugged in. It will start flashing red, after which the indicator lights of both PLC will turn white again.
    plc synchronization
  4. Unplug the additional PLC and plug it in in the room of your choice.
  5. Connect the PLC to the set-top box using an Ethernet cable.
    plc set-top box
  6. If possible, connect the power cable of the set-top box to the PLC or to a multi-socket plugged into the PLC.
    plc power supply

Did you find this helpful?

Thank you

Contact

Our advisors are at your disposal. Choose your contact mode.