LEDs on your decoder

You have a problem watching TV? The LEDs on your decoder can help you understand where the problem is coming from. What is your decoder?


Android TV decoder

Android TV decoder

Your Android TV decoder has two indicator lights. They are standard white.
On the left side the indicator will be red when the decoder is in standby or starting up. Press the button on the remote control to exit the standby mode.
On the right side the control light will be red if the internet connection is insufficient to operate the decoder correctly. First check if the Ethernet cable at the back of your decoder is properly connected. Is the control light still red? Consult our advice in case of TV problems.


V6 decoder

Décodeur V6

Power : The decoder is on. Is it off? Press the Power button. Also check that the switch on the back of the decoder is pressed and that the power cable is connected to your decoder on one side and to a power outlet on the other.

SIG : The decoder receives a signal from the modem. He's not? Check the connection, on one side of the Ethernet cable in the decoder, on the other side in the modem, PLC, Wi-Fi Bridge Wi-Fi Booster or Wi-Fi Extender. The SIG LED stays off? Please check the LEDs on your b-box modem and on your PLC, Wi-Fi Booster, Wi-Fi Bridge or Wi-Fi Extender (if you have one of these devices).

HD : The decoder receives the HD TV signal and you watch an HD channel. You can check if you can receive HD channels at home.

REC : This LED only lights up during a decoder reset, not during recording.

V5 compact decoder

Décodeur V5 compact

Power : The decoder is on. Is it off? Press the Power button. Also check that the switch on the back of the decoder is set to 1 and that the power cable is connected to your decoder on one side and to a power outlet on the other.

SIG : The decoder receives a signal from the modem. He's not? Check the connection, on one side of the Ethernet cable in the decoder, on the other side in the modem, PLC, Wi-Fi Bridge or Wi-Fi Extender. The SIG LED stays off? Please check the LEDs on your b-box modem and on your PLC, Wi-Fi Booster, Wi-Fi Bridge or Wi-Fi Extender (if you have one of these devices).

HD : The decoder receives the HD TV signal and you watch an HD channel. You can check if you can receive HD channels at home.

REC : This LED only lights up during a decoder reset, not during recording.


V5 decoder

Décodeur V5

Power. The decoder is on. He's not? Press the Power button. Also check that the switch on the back of the decoder is set to 1 and that the power cable is properly connected to your decoder. Starting the decoder takes several minutes. If an error message appears or if the decoder screen remains blocked on Welcome +, check the wiring of the unit.

REC. A recording is in progress on the hard disk of the decoder.

HD. You're watching a high-definition channel. Vous pouvez vérifier si vous pouvez recevoir les chaînes en HD chez vous.

Do you see Error 40 on your decoder? You have to restart it.

Do you have a question?

Ask one of our advisors. Make your choice: