- Plug a PLC into a power socket near your b-box.
- Connect your PLC to the b-box using an Ethernet cable.
- If possible, connect your b-box to the PLC or a multi-socket plugged into the PLC.
- Plug in the second PLC near your TV Box. Connect the PLC to the TV Box using an Ethernet cable.
. - If possible, connect the power cable of the TV Box to the PLC or to a multi-socket plugged into the PLC.
Install your PLC adapter
PLC adapters allow you to connect your b-box modem to your TV Box over the electric power network. You will need at least two PLC: one near your b-box and the other near your TV Box. After that you can install as many PLC as you like in your home.
Do you have moved, or purchased your PLC separatly?
You have moved your b-box or your TV Box? You have bought your PLC separatly? You have to reset and synchronize your PLC before to install them.
-
-
- Plug in your additional PLC in the same room as a previously configured PLC. Wait 45 seconds.
- Press the button on the side of the previously configured PLC for a second.
- Within the next two minutes, press the button on the side of the PLC you just plugged in. It will start flashing red, after which the indicator lights of both PLC will turn white again.
- Unplug the additional PLC and plug it in in the room of your choice.
- Connect the PLC to the TV Box using an Ethernet cable.
- If possible, connect the power cable of the TV Box to the PLC or to a multi-socket plugged into the PLC.