Operate your home cinema system with the ProximusTV remote control

Before starting, we ask you to pick up the remote control of your home cinema set and your Proximus TV remote control. The aim is to transmit the codes from one remote control to the other.
For example, you can copy your home cinema's volume control to the Proximus TV remote.

Click on your remote control and follow the steps below


Remote control V5

Remote control V5

You cannot control your home cinema with this remote control.


Remote control V4

Remote control V4
The following buttons cannot be reprogrammed:

Image Image Image Image Image Image

  1. Simultaneously press Image and Image on your Proximus TV remote control for 3 seconds. The indicators will not be lit while you do so. After 3 seconds the Image indicator will come on.
  2. Next, press Image + the button of your Proximus TV remote control which you wish to reprogram.
    Once the indicator on the remote control lights up briefly, your Proximus TV remote control is ready to receive the codes.

    If you selected a button which cannot be reprogrammed or if you waited too long (30 seconds) before continuing with the next step, the red indicator will flash a few times very briefly, after which it will go out and the remote control will return to operating mode.

Transmitting the codes to the Proximus TV remote control

  1. Now hold the remote control of the device (in this example, your home cinema set's remote control) 3 to 6 cm away from the Proximus TV remote control (the top ends of the remote control units should be facing each other).
  2. Press the button of the remote control of the device which you want to copy to the Proximus TV remote control.
  3. The functions will have been successfully copied to the Proximus TV remote control if the red indicator flashes briefly.
  4. The remote control returns to operating mode.
  5. To program other buttons, go back to step 1.

Remote control V3

Remote control V3

Preparing the Proximus TV remote control

  1. Simultaneously press Image and Imagefor 3 seconds. The red indicators will not be lit while you do so. After said 3 seconds the red indicator of the device concerned will flash twice and then stay on.
  2. Press the Image button to select the device on which the commands will be recorded.
  3. Press in the Image button or the Imagebutton + the desired button for 3 seconds.
    • If the code is valid, one of the red indicators will flash twice as confirmation.
      The red indicator will then stay on; the remote control is ready to be used again.
    • If the code is not valid, the red indicator will flash once. The remote control will stay in configuration mode. Nothing will happen.

Transmitting the codes to the Proximus TV remote control

  1. Place the remote control of the device in front of the Proximus TV remote control. This way the latter will receive the codes via infra-red signals and the functions will be copied to it.
  2. Press the associated button of the original remote control.
  3. The functions will have been successfully added or copied to the Proximus TV remote control if the red indicator flashes twice as confirmation. The red indicator will stay on and the remote control will return to operating mode.
  4. To finish, press the Image button.

Remote control V2

Remote control V2

Preparing the Proximus TV remote control

  1. Simultaneously press Image and Imagefor 3 seconds. The red indicators will not be lit while you do so. After said 3 seconds the red indicator of the device concerned will flash twice and then stay on.
  2. Press the Image button to select the device on which the commands will be recorded.
  3. Press in the Image button or the Imagebutton + the desired button for 3 seconds.
    • If the code is valid, one of the red indicators will flash twice as confirmation.
      The red indicator will then stay on; the remote control is ready to be used again.
    • If the code is not valid, the red indicator will flash once. The remote control will stay in configuration mode. Nothing will happen.

Transmitting the codes to the Proximus TV remote control

  1. Place the remote control of the device in front of the Proximus TV remote control. This way the latter will receive the codes via infra-red signals and the functions will be copied to it.
  2. Press the associated button of the original remote control.
  3. The functions will have been successfully added or copied to the Proximus TV remote control if the red indicator flashes twice as confirmation. The red indicator will stay on and the remote control will return to operating mode.
  4. To finish, press the Image button.

Remote control V1

Remote control V1

Preparing the Proximus TV remote control

  1. Simultaneously press Image and Imagefor 3 seconds. The red indicators will not be lit while you do so. After said 3 seconds the red indicator of the device concerned will flash twice and then stay on.
  2. Press the Image button to select the device on which the commands will be recorded.
  3. Press in the Image button or the Imagebutton + the desired button for 3 seconds.
    • If the code is valid, one of the red indicators will flash twice as confirmation.
      The red indicator will then stay on; the remote control is ready to be used again.
    • If the code is not valid, the red indicator will flash once. The remote control will stay in configuration mode. Nothing will happen.

Transmitting the codes to the Proximus TV remote control

  1. Place the remote control of the device in front of the Proximus TV remote control. This way the latter will receive the codes via infra-red signals and the functions will be copied to it.
  2. Press the associated button of the original remote control.
  3. The functions will have been successfully added or copied to the Proximus TV remote control if the red indicator flashes twice as confirmation. The red indicator will stay on and the remote control will return to operating mode.
  4. To finish, press the Image button.

Did you find this helpful?


More

Forum

Didn’t find an answer? Join our community where customers and experts help each other (in French).

Forum